DANH MỤC SẢN PHẨM

Tìm kiếm nâng cao

Tin mới nhất

Xem tiếp

Hỗ trợ trực tuyến

Tỉ giá ngoại tệ

Đối tác

Thống kê

Số lượt truy cập 1610241 lần

Có 90 khách hàng đang online

Tủ sấy

Tủ sấy,DSO-300D,Digisystem,Đài loan

Tủ sấy,DSO-300D,Digisystem,Đài loan

Memmert lồng ấp lạnh IPP800 (800 lít)

Cooled incubator, Peltier-technology
Model IPP 800

Standard equipment

Memmert lồng ấp lạnh IPP500 (500 lít)

Cooled incubator, Peltier-technology
Model IPP 500

Standard equipment

Memmert lồng ấp lạnh IPP400 (400 lít)

Cooled incubator, Peltier-technology
Model IPP 400

Standard equipment

Memmert lồng ấp lạnh IPP300 (300 lít)

Cooled incubator, Peltier-technology
Model IPP 300

Standard equipment

Memmert lồng ấp lạnh IPP200 (200 lít)

Cooled incubator, Peltier-technology
Model IPP 200

Standard equipment

Tủ ấm vi sinh INE 200 (Đức)

Precision incubator
Model INE 200

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
"Loop" function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value and actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
incl. works calibration certificate for +37 °C

Tủ ấm memmert-INB-500

Precision incubator
Model INB 500

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4-wire-circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
digital LED- display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5

Tủ ấm memmert-INB-400

Precision incubator
Model INB 400

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4-wire-circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
digital LED- display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5 °C

Tủ ấm memmert-INB-300

Precision incubator
Model INB 300

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4-wire-circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
digital LED- display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5 °C

Tủ ấm memmert-INB-200

Precision incubator
Model INB 200

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
one Pt100 sensor class A in 4-wire-circuit
integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
digital LED- display of set and actual temperature as well as remaining process time
resolution of display for set value and actual value 0,5 °C

Overtemperature protection (double)

in case of total breakdown of sensor, the heating is switched off at approx. 3 °C above set value
in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
for very sensitive and/or valuable load in terms of being non-reproducable, we recommend ovens of our E- and P-class guaranteeing an even higher safety standard

Tủ ấm memmert-UNE-500PA

Universal oven "Paraffin Oven"
Model UNE 500 PA

Standard equipment

Control

fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
"Loop" function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value: 0,5 °C
resolution of display for actual value: 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
incl. works calibration certificate for +80 °C

Tủ ấm memmert-UNE-400PA

Universal oven "Paraffin Oven"
Model UNE 400 PA

Standard equipment

Control

fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
"Loop" function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value: 0,5 °C
resolution of display for actual value: 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
incl. works calibration certificate for +80 °C

Tủ ấm memmert-UNE-300PA

Universal oven "Paraffin Oven"
Model UNE 300 PA

Standard equipment

Control

fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
"Loop" function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value: 0,5 °C
resolution of display for actual value: 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
incl. works calibration certificate for +80 °C

Tủ sấy memmert-UNP-800

Universal oven
Model UNP 800

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-700

Universal oven
Model UNP 700

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-600

Universal oven
Model UNP 600

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-550

Universal oven
Model UNP 550

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-400

Universal oven
Model UNP 400

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-300

Universal oven
Model UNP 300

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNP-200

Universal oven
Model UNP 200

Standard equipment

Ventilation and Control

natural convection
adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
vent connection with restrictor flap
adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
autodiagnostic system with fault indication
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
tempering profiles of up to 40 ramps
time- and set-point dependent operation
air flap adjustable in 10% steps
digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
programme stored on power failure
parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
incl. works calibration certificate for +160 °C

Tủ sấy memmert-UNE-800

Universal oven
Model UNE 800

Standard equipment

Ventilation and Control

natural convection
continuous adjustment of pre-heated fresh air admixture
vent connection with restrictor flap
fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
solid state switching unit
2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
DELAYED ON
HEATING UP
HOLD or HOLD set-temperature-dependent with guaranteed holding time
COOLING DOWN
"Loop" function to repeat profile 1-99 times or endless
digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
incl. works calibration certificate for +160 °C